D.A.S. variant series Instrucciones de operaciones descargar pdf (Pagina 19)

Manual del usuario/ User´s manual 40Variant series

4.7 SYSTEM INSTALLATION USING

THE WALL SUPPORT AXW-V25

Then hang the first VARIANT 25A unit from

the wall mount accessory. The two M8x30 DIN965

screws have to be removed from each side of the box

and replaced by two M8x35DIN912 screws.

Up to three VARIANT 25A units can be wall

mountedby means of theAXW-V25accessory.

First the accessory must be fixed to the

wall, making sure in advance that the work load of the

wall allows for it. The wall mount accessory will be

attached to the wall using six nº 10 rawlplugs and six

7x 40 mm screws.

Three different washers must be used along

the M8x35DIN912 screws and placed in thefollowing

order-grower (lock) washer, metal washer and rubber

washer.

Warning!!If three VARIANT25A units have to be hung

it is advisable to fix the box in the middle to the wall

mountaccessory.

M8X30 DIN965

Rubber washer

M8x35 DIN 912

Grower washer

Metal washer

In order to hang the rest of the boxes the

captive rigging hardware and safety pins will be used,

and the procedures described on the 4.3 paragraph of

this manual will be followed. The picture below shows

three VARIANT25A units fixedto the wall.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25 26

Sin comentarios

D.A.S. variant series Instrucciones de operaciones Pagina 19