D.A.S. variant series Instrucciones de operaciones descargar pdf (Pagina 5)

To facilitate the insertion of the connecting

links in the corresponding slot of the top box, each

angle has an associated pin hole which is labeled and

located on each side of the box. Highly resistant 6mm

quick release pins with a ball safety lock are used set

the angles.

B) AXC-V25

The is made from stainless steel

and has been specially designed to ceiling mount up

to 4 VARIANT25A units. Thisceiling mount accessory

also allows for hook clamps to be fixed to it, so up to 4

boxes can be attached to truss structures. The

VARIANT 25A units must be fixed to the ceiling mount

accessory by means of 4M8x35 DIN912 screws.

AXC-V25

Manual del usuario/ User´s manual 26

0º

1º

2º

4º

5º

10º

9º

7º

8º

6º

3º

0º

1º

2º

4º

5º

10º

9º

7º

8º

6º

3º

In order to fly the units, the connecting link

must be rotated until the desired splay angle is

reached (1). Then the quick release pin must be

introduced into the pin hole labeled with the desired

splay angle (2). The box will be flown from the rotating

point located in the top box as shown in the figure (3),

and finally the lower box will be secured by

introducing one more quick release pin in the top box

(4).

first

Variant series

Most of the accessories needed to fly or

stack the units are integral to the enclosures. The only

additional items needed are therigging bumpers.

A) AX-V25

The AX-V25 rigging grid (bumper) is made

from steel beams and is designed to handle great

loads. It features a center reinforcement bar that is

also used for the lifting slings. One chain can be used

to determine the tilt angle of the whole cluster,

depending on the hole used to attach the chain to the

center bar. The first box in the array will be attached to

the AX-25 by means of the above described

connecting links and quick release safety pins. Both

the VARIANT 25A and VARIANT 18A can be attached

to the AX-V25 bumper. Up to 20 VARIANT 25A units

can be flown from the AX-V25 bumper while

maintaining a7:1 safety ratio.

Weight

Dimensions: 29 x 58.5 x 16.9 cm

(HxWxD) 11.4

: 2.6 kg (5.7 lb)

x 23 x 6.6 in

Weight

Dimensions:5x57.4x39cm

(HxWxD) 2

: 5 kg (11 lb)

x 22.6 x 15.4 in

1 2 3 4 5 6 7 8 9 10 ... 25 26

Comentarios a estos manuales

Sin comentarios

D.A.S. variant series Instrucciones de operaciones Pagina 5

Comentarios a estos manuales

Relacionado con productos y manuales para Amplificadores de audio D.A.S. variant series